Resources

Material library

Every material the plans draw, the schedules count and the specifications describe, by its code: one entry each, so a finish changed here changes in every drawing and table that names it.

18 materials · 9 patterns · 10 categories

Floor finishes

  • S1Porcelain tiles 60×60Rectified porcelain stoneware tiles 60×60 cm, 10 mm, laid on adhesive over a levelling screed, 2 mm joints, matching skirting.Measured in m² · pattern HP-04
  • S2Slip-resistant tiles 30×30 (R11)Slip-resistant ceramic tiles 30×30 cm, class R11, over a waterproofing membrane turned up 10 cm, falls to the drain.Measured in m² · pattern HP-04
  • S3Engineered oak flooringEngineered oak boards 14 mm (3 mm wear layer), floating on an acoustic underlay, oiled finish.Measured in m² · pattern HP-05

Ceilings

  • P1Plasterboard ceiling, paintedSuspended plasterboard ceiling BA13 on metal furrings, joints taped, two coats of matt acrylic paint.Measured in m² · pattern HP-00
  • P2Moisture-resistant plasterboard ceiling, paintedSuspended moisture-resistant plasterboard (H1) on galvanised furrings, two coats of anti-mould paint.Measured in m² · pattern HP-06
  • P5Plasterboard bulkheadPlasterboard bulkhead boxing services, on metal framing, painted to match the ceiling.Measured in m · pattern HP-08

Wall finishes

  • R1Plaster, paintedGypsum plaster skim, two coats of washable matt acrylic paint.Measured in m² · pattern HP-00
  • R2Ceramic wall tiles 20×60Glazed ceramic wall tiles 20×60 cm on adhesive over waterproofing, full height in wet areas.Measured in m² · pattern HP-04

Structure

  • M01Reinforced concreteReinforced concrete C25/30, formwork and reinforcement to the engineer's drawings.Measured in m³ · pattern HP-02

Walls and partitions

  • M02Hollow concrete blocksHollow concrete blocks 20 cm, laid in cement mortar, rendered both faces.Measured in m² · pattern HP-03
  • M03Solid brickSolid clay bricks in stretcher bond, cement-lime mortar.Measured in m² · pattern HP-07
  • M04Plasterboard partitionMetal stud partition 72/48 with two BA13 boards each side and mineral wool.Measured in m² · pattern HP-00

Insulation

  • I01Mineral wool insulationMineral wool, λ ≤ 0.035 W/m·K, thickness to the thermal study.Measured in m² · pattern HP-08

Glazing

  • V01Double glazingInsulating double glazing 4/16/4, low-e, argon-filled.Measured in m² · pattern HP-00

Ground

  • T01Natural groundNatural ground, excavated and levelled to formation.Measured in m³ · pattern HP-06
  • T02Compacted gravelCrushed gravel 0/31.5, compacted in 20 cm layers.Measured in m³ · pattern HP-06

Timber

  • M05Timber (structural)Structural softwood C24, treated class 2.Measured in m³ · pattern HP-05

Metal

  • M06SteelStructural steel S275, shop-primed, fire protection where required.Measured in m · pattern HP-01

Patterns

  • HP-00None (tint only)
  • HP-01Solid
  • HP-02Diagonal hatch
  • HP-03Crosshatch
  • HP-04Tile grid
  • HP-05Planks
  • HP-06Stipple
  • HP-07Brick bond
  • HP-08Wide diagonal